Deutsch | Norsk

2D version

3D version

Hvow to install

DigPilot 3D with GPS/GNSS

With DigPilot 3D installed on your excavator you get complete overview of the project you are working with. These are a some of the things you can do:

Make your own projects

With the GPS version you can make your own projects directly on the DigPilot. In this way you are not dependent on project files from a surveyor to make use of your GPS/GNSS. You can make ditches, slopes, profiles etc. like you do on the 2D version without GPS/GNSS. The advantage of the 3D version is that you can use the GPS/GNSS to determine the exact location of your project, and therefore you need not reference the height after moving the machine. Not to mention that you can make more complex projects such as building pits.

Reads LandXML directly

DigPilot also reads LandXML projects directly. If you have received your project as a LandXML file (.xml), you can load it directly onto the DigPilot from a USB stick.

LandXML is a non-proprietary data standard supported by many companies, and export to LandXML can therefore be made from most construction software.

Record your work

Another benefit of the GPS/GNSS version is that you can use it to record your work. By placing the bucket tip on appropriate points on the area you have just excavated and pressing a button on the screen, the coordinate points will be stored.

The coordinate points are stored in a file in which you for instance can add a comment for each coordinate point. The file can then be stored on a USB stick and read by other
software.

3D graphics

With the GPS version you can view the excavator and the project in 3D. And with the single press of a button you can switch between 3D perspective view, 2D top view and 2D side view.